Arylidene polymers. XVIII. Synthesis and thermal behavior of organometallic arylidene polyesters containing ferrocene derivatives in the main chain

A new interesting category of organometallic polyesters based on diarylidenecycloalkanones containing ferrocene derivatives in the polymer main chain has been prepared by interfacial polycondensation of 1,1′-dichlorocarbonyl ferrocene or 1,1′-dichlorocarbonyl-4,4′-diiodoferrocene with 2,5-bis(p-hydroxybenzylidene)cyclopentanone, 2,5-divanillylidenecyclopentanone, 2,6-bis(p-hydroxybenzylidene)cyclohexanone, 2,6-divanillylidenecyclohexanone, and 2,7-bis(p-hydroxybenzylidene) cycloheptanone. The resulting polyesters were characterized by elemental analyses, infrared spectroscopy, solubility, and viscometry measurements. The thermal behavior of the synthesized polymers was evaluated by thermal gravimetric analysis and correlated with their structures. The crystallinity of all polymers were examined by x-ray diffraction analysis. Moreover, the electrical conductivity of a selected example of polymer was investigated above the temperature range (300–500 K) and showed that it followed an Arrhenius-type equation with activation energy 2.09 eV. © 1993 John Wiley & Sons, Inc.     

Comparison between some empirical equations of state for polymers

Some commonly used empirical equations of state for polymers are considered: the Spencer-Gilmore equation with two and three adjustable parameters, the Whitaker-Griskey equation, and the Rehage-Breuer equation. Also, a new equation is proposed: the Inverse Volume equation. These equations are evaluated with regard to fitting experimental P-V-T data and agreement with experimental data on isothermal compressibility and thermal expansion coefficient. The adjustable parameters for each equation are determined with the help of Rosenbrock's optimum-seeking technique. Analysis of the residuals on specific volume for a variety of materials suggests that the Spencer-Gilmore equation with three adjustable parameters, the Rehage-Breuer and the Inverse Volume equations yield the smallest and most random residuals and thus the least systematic error. The same three equations mentioned above yield results in good agreement with experimental isothermal compressibility data. However, among all the equations considered in this study, the Inverse Volume equation yields the best agreement with experimental thermal expansion coefficient data. Furthermore, it is the only equation to correctly predict the rise in thermal expansion coefficient with increasing temperature.     

Lignan contents in sesame seeds and products

Sesame seed (Sesamum indicum L.) is a rich source of furofuran lignans with a wide range of potential biological activities. The major lignans in sesame seeds are the oil‐soluble sesamin and sesamolin, as well as glucosides of sesaminol and sesamolinol that reside in the defatted sesame flour. Upon refining of sesame oil, acid‐catalyzed transformation of sesamin to episesamin and of sesamolin to epimeric sesaminols takes place, making the profile of refined sesame oils different from that of virgin oils. In this study, the total lignan content of 14 sesame seeds ranged between 405 and 1178 mg/100 g and the total lignan content in 14 different products, including tahini, ranged between 11 and 763 mg/100 g. The content of sesamin and sesamolin in ten commercial virgin and roasted sesame oils was in the range of 444–1601 mg/100 g oil. In five refined sesame oils, sesamin ranged between 118 and 401 mg/100 g seed, episesamin between 12 and 206 mg/100 g seed, and the total contents of sesaminol epimers between 5 and 35 mg/100 g seed, and no sesamolin was found. Thus, there is a great variation in the types and amounts of lignans in sesame seeds, seed products and oils. This knowledge is important for nutritionists working on resolving the connection between diet and health. Since the consumption of sesame seed products is increasing steadily in Europe and USA, it is important to include sesame seed lignans in databases and studies pertinent to the nutritional significance of antioxidants and phytoestrogens. It is also important to differentiate between virgin, roasted and refined sesame oils.     

Graft Copolymerization of Acrylamide onto Oil Palm Empty Fruit Bunch (OPEFB) Fiber

Grafting of acrylamide (AAm) onto oil palm empty fruits bunch fiber using hydrogen peroxide as initiator and methyl acrylate as comonomer was investigated. The amount of comonomer needed to make grafting of acrylamide possible was determined. The percentage of poly(acrylamide) and the comonomer in the final graft copolymer was estimated by elemental analysis. Results obtained indicated that methyl acrylate facilitated the incorporation of acrylamide monomer onto OPEFB. The reactivity ratios for both monomers were determined by using Fineman–Ross plot. The effects of reaction temperature and period as well as amount of the initiator, solvent, monomer and comonomer on the percentage of grafting at fixed amount of comonomer (11 mmol) were studied. Maximum percentage of grafting was achieved when the amount of initiator and solvent 3.98×10⁻³ mol and 50 mL respectively. The optimum reaction temperature was 50 ^○C and the reaction period was 90 min. Highest percentage of grafting was 232% when 25.6 mmol of acrylamide was used under these optimum conditions. The presence of functional group in the grafted polymer is characterized by infrared spectroscopy and the surface morphology is observed by scanning electron microscopy. Thermoanalytic investigation on OPEFB and OPEFB-g-PAAM were carried out to evaluate the thermal stability and respective activation energy of the materials.     

Epoxy‐montmorillonite clay nanocomposites: Synthesis and characterization

Nanocomposites of epoxy resin with montmorillonite clay were synthesized by swelling of different proportions of the clay in a diglycidyl ether of bisphenol‐A followed by in situ polymerization with aromatic diamine as a curing agent. The montmorillonite was modified with octadecylamine and made organophilic. The organoclay was found to be intercalated easily by incorporation of the epoxy precursor and the clay galleries were simultaneously expanded. However, Na‐montmorillonite clay could not be intercalated during the mixing or through the curing process. Curing temperature was found to provide a balance between the reaction rate of the epoxy precursor and the diffusion rate of the curing agent into the clay galleries. The cure kinetics were studied by differential scanning calorimetry. The exfoliation behavior of the organoclay system was investigated by X‐ray diffraction. Thermogravimetric analysis was used to determine the thermal stability, which was correlated with the ionic exchange between the organic species and the silicate layers. The morphology of the nanocomposites was evaluated by scanning electron microscopy. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 93: 2201–2210, 2004     

Synthesis of nitrogen incorporated diamond-like carbon thin films using microwave surface-wave plasma CVD

Nitrogenated diamond-like (DLC:N) carbon thin films have been deposited by microwave surface wave plasma chemical vapor deposition on silicon and quartz substrates, using argon gas, camphor dissolved in ethyl alcohol composition and nitrogen as plasma source. The deposited DLC:N films were characterized for their chemical, optical, structural and electrical properties through X-ray photoelectron spectroscopy, UV/VIS/NIR spectroscopy, Raman spectroscopy, atomic force microscope and current–voltage characteristics. Optical band gap decreased (2.7 to 2.4 eV) with increasing Ar gas flow rate. The photovoltaic measurements of DLC:N / p-Si structure show that the open-circuit voltage (V_oc) of 168.8 mV and a short-circuit current density (J_sc) of 8.4 μA/cm² under light illumination (AM 1.5 100 mW/cm²). The energy conversion efficiency and fill factor were found to be 3.4 × 10^{− 4}% and 0.238 respectively.     

Filling of a complex-shaped mold with a viscoelastic polymer. Part II: Comparison with experimental data

An experimental program has been carried out on a reciprocating screw injection molding machine in order to establish the validity of a proposed mathematical model for the filling stage of injection molding. A cavity of complex shape with an insert and variable thickness was constructed and used in these experiments. Good agreement between predicted (through computer simulation) and observed (through short-shot experiments and transducer response) results is obtained for free surface shapes and free surface locations with time. The theoretical pressure predictions are in fairly good agreement with experiments, with the maximum deviations occurring towards the end of filling and for longer filling times. This points towards the possibility that wall solidification during filling interacts with the flow processes across the gap of the cavity and makes necessary a more detailed characterization of the heat transfer at the melt/mold interface.     

The impact of interaction quality factors on the effectiveness of Web-based information system: the mediating role of user satisfaction

Recently, IS researchers have focused on the assessment of Web-based information system (WBIS) at the individual level as it highly contributes to the organizations’ employees. The evaluation and development of WBIS is significantly needed because the top management is in need of justifying their costly IT investment in terms of its impacts on employee performance. For this purpose, this study is primarily concerned with the development and validation of new multidimensional instrument, and also a theoretical framework for assessing the impacts of user interface quality, online communication quality, and user satisfaction on the effectiveness of Web employee portals. The effectiveness is assessed in terms of contextual performance. In a large-scale study, a sample of 384 United Nations Relief and Works Agency for Palestine Refugees respondents are gathered in order to validate and check the reliability of the adapted study instrument. The results of validity and reliability analysis provide enough confidence to proceed toward validating the proposed theoretical framework. The results of multiple-regression analysis indicate that there is a positive significant relationship between user interface quality, communication quality, user satisfaction, and effectiveness at significance level (sig. < 0.01). As another important point, the results of hierarchical regression showed that user satisfaction has a mediating role on the relationship between user interface quality, communication quality, and contextual employee performance. The findings and implications of this research are discussed. Finally, it is expected that this study would contribute to empirical studies in the fields of IS and user behavior assessment.     

The effect of the N-linked glycans on structural features and physicochemical functions of soybean β-conglycinin homotrimers

β-Conglycinin is a trimeric protein consisting of three subunits, α,α′,and β, which are N-glycosylated. The α and α′ subunits contain extension regions in addition to core regions common to all subunits. We purified homogeneous trimers consisting of only α, α′, or β from mutant soybean cultivars containing β-conglycinin lacking one or two subunits: α homotrimers from an α′-lacking mutant, α′ homotrimers from an α-lacking mutant, and β homotrimers from an α-and α′-lacking mutant. Structural features and physicochemical functions of the three homotrimers were examined and compared with those of recombinant homotrimers having no N-linked glycans. The native homotrimers have secondary structures very similar to those of the recombinant ones. In analogy with the recombinant homotrimers, the native ones exhibit different thermal stabilities from one another (β>α′>α), and the native α and α′ homotrimers exhibit better solubility, emulsifying ability, and heat-induced association than the native β homotrimer. Further, the N-linked glycans contribute to solubilities of the three subunits at low ionic strength (μ=0.08) and to the emulsifying ability of the native β homotrimer. N-Linked glycans also prevent heat-induced associations of the native α and α′ homotrimers but do not contribute to the secondary structure and the thermal stability of β-conglycinin.     

Evaluation of thermodynamic theories to predict interfacial tension between polystyrene and polypropylene melts

The commonly used thermodynamic theories (mean field theory and the square gradient theory) to predict interfacial tension between polymers have been modified. The results of these theoretical developments have not yet been fully tested and compared to experimental data. In this paper, experimental data for the effects of temperature, molecular weight, and molecular weight dispersity on interfacial tension for polypropylene/polystyrene polymer pairs are compared with the predictions of the new versions of the above theories. To evaluate these theories, it is necessary to know the Flory-Huggins interaction parameter for the polymer pairs studied. The relation correlating the Flory-Huggins interaction parameter to the Hildebrand solubility parameter was not suitable for evaluating the theoretical predictions of interfacial tension. Instead, the Flory Huggins interaction parameter was expressed as the sum of an enthalpic contribution, χ_H, and entropic contribution, χ_s. In the absence of reliable experimental values, a method was developed to evaluate the two contributions, based on interfacial tension data. The procedure provided an interaction parameter that is allowed to depend on molecular weight. When this approach was used, the predictions of only the new version of the square gradient theory were in good agreement with the experimental data for the influence of temperature and molecular weight on interfacial tension. However, the theory predicted the effect of polydispersity on interfacial tension only at high temperatures.